Denon DP-1000 owners manual, service manuals and schematics are for reference only and the Vinyl Engine bears no responsibility for errors or other.

Please select your desired model below. We have 40 Denon Diagrams, Schematics or Service Manuals to choose from, all free to download!

Rendered in 0.0202 seconds

Update a driver for hardware that isn’t working properly: That means pause, FF, chaptering If you’re asking for technical samsung dtv dmr, please be sure to include all your system info, including operating system, model number, samsung dtv dmr any other specifics related to the problem. Samsung DTV DMRI saw on the Samsung site someone else had samsung dtv dmr message with 32 bit Vista as well. Also please exercise your best judgment when posting in the forums–revealing personal information such as your e-mail address, telephone number, and address is not recommended. I hope this helps someone. Realtek dtv usb device drivers for mac.

CHON123POWERCHVCROFF456VCR POWERCHVOLCLEAR789TVTV POWERCHTV/VCRSLEEPCALL+100DISPLAYRETURNINPUT MODESURROUNDMENUFUNCTIONENTERMODEVOLUMEBANDMUTECHSHIFTNTSC/PALSTATUSTUMEMOSUB TITLEAUDIOANGLETOP MENURDSPTYCTRTPROG/DIRECTREPEAT A-BREPEATRANDOMDVD SURROUND RECEIVER ADV-1000FUNCTIONMASTER VOLUMECH.SELECTT.TONESDB/TONESURR.PARA/ SELECTC 8 1:02:46SETUPCDR/MD/TAPE TUNER/TV/VCRDVDPROGRESSIVE SCANREMOCON MODEON / STANDBYPHONESAUTO DECODE 5CH STEREOSURROUNDSTATUS TIMER/SETSDB/TONEMODEOPEN / CLOSEBAND- TUNING +2CH MODE. Z Before Using.3x Cautions on Installation.3c Cautions on Handling.3v Features.4b Discs.4n Cautions on Handling Discs.5m Connections.58, Part Names and Functions.9. Remote Control Unit.1011⁄0Setting up the System.1216⁄1Play Back.1718⁄2Operation.1920. ⁄3Dolby / DTS Surround.2021⁄4Surround Playback.2225⁄5DSP Surround Simulation.2627⁄6Listening to the Radio.2830⁄7On-Screen Display.31⁄8Using the On-Screen Display.3138⁄9Using the Timer.3840¤0Changing the Default Settings (DVD).4146¤1Last Function Memory.46¤2Initialization of the Microprocessor.46¤3Troubleshooting.47¤4Specifications.48.

1 BEFORE USINGPay attention to the following before using this unit:. Moving the setTo prevent short circuits or damaged wires in the connection cords, always unplug the power cord and disconnect the connection cords between all other audio components when moving the set. Before turning the power switch onCheck once again that all connections are proper and that there are not problems with the connection cords.

Always set the power switch to the standby position before connecting and disconnecting connection cords. Noise or disturbance of the picture may be generated if this unit or any other electronic equipment using microprocessors is used near a tuner or TV.If this happens, take the following steps:. Install this unit as far as possible from the tuner or TV. Set the antenna wires from the tuner or TV away from this unit’s power cord and input/output connection cords. Noise or disturbance tends to occur particularly when using indoor antennas or 300 Ω /ohms feeder wires. We recommend using outdoor antennas and 75 Ω /ohmscoaxial cables.For heat dispersal, leave at least 10 cm of space between the top, back and sides of this unit and the wall or other components. 3 CAUTIONS ON HANDLING.

Switching the input function when input jacks are not connectedA clicking noise may be produced if the input function is switched when nothing is connected to the input jacks. If this happens, either turn down the MASTER VOLUME control or connect components to the input jacks. Muting of PRE OUT jacks, HEADPHONE jack and SPEAKER terminalsThe PRE OUT jacks, HEADPHONE jacks and SPEAKER terminals include a muting circuit. Because of this, the output signals are greatly reduced for several seconds after the power switch is turned on or input function, surround mode or any other-set-up is changed.

If the volume is turned up during this time, the output will be very high after the muting circuit stops functioning. Always wait until the muting circuit turns off before adjusting the volume. Dolby Digital decoderDolby Digital, a digital discrete system in which the different channels are completely independent, recreates “three-dimensional” sound fields (sounds with a sense of distance, movement and position) with no crosstalk between channels for greater reality. In addition, the 5 channels (excluding the 0.1 channel for low frequency effects) have a playback range extending to 20 kHz, the same as the range of CDs, thus resulting in clearer, more richly expressive sound.2. Dolby Pro Logic II decoderDolby Pro Logic II is a new format for playing multichannel audio signals that offers improvements over conventional Dolby Pro Logic. It can be used to decode not only sources recorded in Dolby Surround but also regular stereo sources into five channels (front left/right, center and surround left/right).

In addition, various parameters can be set according to the type of source and the contents, so you can adjust the sound field with greater precision.3. DTS (Digital Theater Systems)DTS provides up to 5.1 channels of wide-range, high fidelity surround sound, from sources such as laser disc, DVD and specially-encoded music discs.4. High performance DSP simulates 7 sound fieldsPlayback is possible in 7 surround modes: 5-channel Stereo, Mono Movie, Rock Arena, Jazz Club, Video Game, Matrix and Virtual.

You can enjoy a variety of sound effects for different movie scenes and program sources even with stereo sources not in Dolby Surround. Personal Memory Plus functionPersonal Memory Plus is an advanced version of Personal Memory. With Personal Memory Plus, the set automatically memorizes the surround mode and input mode for each of the separate input sources.6.

Remote control unit with pre-memory functionThis unit comes with a remote control unit equipped with a pre-memory function. The remote control command codes for DENON remote controllable components as well as for video decks, TVs, etc., of other major manufacturers are prestored in the memory.7. 6-channel digital power amplifierThe ADV-1000 is equipped with a 55W + 55W (6 Ω /ohms, 1 kHz, T.H.D. 10%) 6-channel digital power amplifier, allowing 5.1-channel surround playback when used in combination with the super woofer.8.

Many convenient functions(1) Multiple audio functionSelection of up to 8 audio languages.(The number of languages offered differs from DVD to DVD.)(2) Multiple subtitle functionSelection of up to 32 subtitle languages.(The number of languages offered differs from DVD to DVD.)(3) Multiple angle functionThe angle of view can be changed.(For DVDs on which multiple angles are recorded.)(4) Playback disable functionThis function can be used to disable playback of DVDs you do not want children to watch. UsableMark (logo)RecordedDisc sizediscssignalsDVD videoDigital audio +12 cmDVD audiodigital video(NOTE 1)(MPEG2)8 cmDigital audio +12 cmVideo CDdigital video(MPEG1)8 cmCD12 cmCD-RDigital audioCD-RWMP3(NOTE 2)8 cmRecordable ReWritable2 Disc terminology. Titles and chapters (DVD-videos)DVD-videos are divided into several large sections called “titles” and smaller sections called “chapters”.Numbers are allotted to these sections. These numbers are called “title numbers” and “chapter numbers”.For example:Title 1Title 2Chapter 1 Chapter 2 Chapter 3 Chapter 1 Chapter 2. Tracks (video and music CDs)Video and music CDs are divided into sections called “tracks”.Numbers are allotted to these sections.

These numbers are called “track numbers”.For example. Cautions on Loading Discs. Only load one disc at a time. Loading one disc on top of another may result in damage or scratch the discs. Load 8 cm discs securely in the disc guide, without using an adapter. If the disc is not properly loaded, it may slip out of the guide and block the disc tray. Be careful not to let your fingers get caught when the disc tray is closing.

Do not place anything but discs in the disc tray. Do not load cracked or warped discs or discs that have been fixed with adhesive, etc. Do not use discs on which the adhesive part of cellophane tape or glue used to attach the label is exposed, or discs with traces of tape or labels that have been peeled off.

Such discs may get stuck inside the player, resulting in damage. ENGLISH 7 CONNECTIONS. Do not plug in the AC cord until all connections have been. Note that binding pin plug cords together with AC cords orcompleted.placing them near a power transformer will result in.

Be sure to connect the left and right channels properly (leftgenerating hum or other noise.with left, right with right). Noise or humming may be generated if a connected audio.

Insert the plugs securely. Incomplete connections willequipment is used independently without turning theresult in the generation of noise.power of this unit on. If this happens, turn on the power ofthe this unit.(1) Connecting the audio components.

When making connections, also refer to the operating instructions of the other components.Connecting the DIGITAL (optical) jacksUse these for connections to audio equipment with digital (optical) output.NOTE:. Use optical cables for optical connections, removing the cap before connecting.AC CORDAC 230 V, 50 HzS VIDEOVIDEOLOOP ANT.MON.OUTINININOUTMON.OUTINININOUTTV/DBSV.AUXVCRTV/DBSV.AUXVCRFM COAX. 75LAMPRE OUTRIMPEDANCEAV 1SUB WOOFERINOUTINININOUTININOUTRLCENTERSUBRLFRONT6 16WOOFERSURROUNDCDR/TV/DBSV.AUXVCRTV/DBSV.AUXSPEAKER SYSTEMSTAPEDIGITAL(OPTICAL)AUDIOLRRLSubwoofer jackConnect the internal amplifier’s subwoofer to the subwoofer terminal. To conduct digital recording onto a digital recorder (CD recorder, MD recorder, etc.) while playing Dolby Digital, 96 kHz PCM sources on this DVD player.

Set the “AUDIO SETUP” default setting as shown below. (See page 43.). “DIGITAL OUT” → “PCM” “LPCM SELECT” → “ON”Playing DVDs with incorrect settings may result noise that could damage your ears or the speakers.NOTES:.

Track numbers may not be added automatically when making digital recordings of CDs being played on the ADV1000 onto a connected recorder. When making digital recordings on a CD recorder, set the CD recorder’s recording setting to manual and add track numbers (track marks) manually as you record. When making digital recordings on an MD recorder, use the editing function after the recording is completed to divide the tracks.

Connecting a TV/DBS tunerTV/DBS. Connect the TV’s or DBS tuner’s video output jack (VIDEO OUTPUT) to the VIDEO (yellow) TV/DBS IN jack using a 75 Ω /ohms video coaxial pin plug cord. Connect the TV’s or DBS tuner’s audio output jacks (AUDIO OUTPUT) to the AUDIO TV/DBS IN jacks using pin plug cords.

For devices with optical digital outputs, connect the digital output terminal to the ADV-1000’s DIGITAL TV/DBS IN terminal using an optical transmission cable.TV or DBS tunerOPTICALAUDIOVIDEOOUTOUTOUTR LR L. Connecting a CS tunerV.AUX. Connect the CS tuner’s video output jack (VIDEO OUTPUT) to the VIDEO (yellow) V.AUX IN jack using a 75 Ω /ohmsMonitor TVvideo coaxial pin plug cord.Connect the CS tuner’s audio output jacks (AUDIOVIDEOOUTPUT) to theAUDIOV.AUX IN jacks using pin plugINcords.For devices with optical digital outputs, connect the digitaloutput terminal to the ADV-1000’s DIGITAL V.AUX. INterminal using an optical transmission cable.MONITOR OUTCS tuner. Connect the TV’s video inputjack (VIDEO INPUT) to theVIDEOMONITOR OUT jackusing a 75 Ω /ohms videoOPTICALVIDEOAUDIOcoaxial pin plug cord.OUTOUTRLOUTR L. S VIDEOLOOP ANT.MON.OUTINININOUTMON.OUTINININOUTTV/DBSV.AUXVCRTV/DBSV.AUXVCRFM COAX.

ENGLISH(4) Connecting the antenna terminals(5) Connecting to a TV with 21-pin SCART TerminalAM LOOPDIRECTION OF. Use the commercially 21-pin SCART cable to connect the TV’s 21-pin SCART terminal to the ADV-1000’s 21-pin SCART terminal(AV1).ANTENNABROADCASTING(Supplied)STATIONFM INDOORANTENNAADV-1000(Supplied)FM ANTENNAS VIDEOVIDEOLOOP ANT.75 Ω /ohmsMON.OUTTV/DBSV.AUXINVCRMON.OUTTV/DBSV.AUXINVCRININOUTININOUTCOAXIALFM COAX. 75LAMCABLEPRE OUTRIMPEDANCEAV 1SUB WOOFERINOUTINININOUTININOUTRLCENTERSUBRLFRONT6 16WOOFERSURROUNDCDR/TV/DBSV.AUXVCRTV/DBSV.AUXTAPESPEAKER SYSTEMSAUDIODIGITAL(OPTICAL)VIDEOLOOP ANT.OUTMON.OUTINININOUTCRTV/DBSV.AUXVCRFM COAX. 75LAMRFM ANTENNAINCDR/TV/DBSV.AUXINVCRTV/DBSV.AUXOUTADAPTEROUTININOUTININTAPEDIGITAL(OPTICAL)(Option)AUDIO.

TV21-pin SCART terminal. The audio and video signals for the function selected on the set are output.Audio output signals. The tuner and DVD audio playback signals and the audio signals input to the AUDIO INPUT jacks are output. When a Dolby Digital DVD is played, the audio signals are converted to 2-channel signals before being output.

(Audio signals are not output during DTS playback.). The audio output level is fixed. If you do not wish to play the sound on the connected TV, turn the TV’s volume down to the minimum.Video output signals.

The DVD video playback signals and the video signals input to the VIDEO or S-VIDEO INPUT jacks are output. When playing a DVD, RGB video signals can also be output.

The selection of the VIDEO, S-VIDEO and DVD RGB video signals is set at “AV1 VIDEO OUTPUT” system setup item. (By default all are set to “VIDEO”.

See page 16.)NOTES:. Some discs contain copy prohibit signals. If such discs are.Set the “TV TYPE“ in “VIDEO SETUP“ in “DVD SETUP“played via a VCR, the copy prohibit system may causeto comply with your TV's video format. When the TV isdisturbance in the picture.PAL formated, set to PAL.

(See page 43.). Connections. When making connections, also refer to the operating instructions of the other components.FRONT SPEAKERCENTER SPEAKERSURROUND SPEAKERSUB WOOFERSYSTEMSSYSTEMSYSTEMS(L) (R)(L) (R)Connector jack for subwoofer with built-in amplifier (super woofer), etc.S VIDEOVIDEOLOOP ANT.MON.OUTINININOUTMON.OUTINININOUTTV/DBSV.AUXVCRTV/DBSV.AUXVCRFM COAX. 75LAMPRE OUTRIMPEDANCEAV 1SUBINOUTINININOUTININOUTRLCENTERSUBRLFRONT6 16WOOFERSURROUNDCDR/TV/DBSV.AUXVCRTV/DBSV.AUXSPEAKER SYSTEMSTAPEDIGITAL(OPTICAL)AUDIO.

Precautions when connecting speakersIf a speaker is placed near a TV or video monitor, the colors on the screen may be disturbed by the speaker’s magnetism. If this should happen, move the speaker away to a position where it does not have this effect. (7) Speaker system connections. Use speaker cords with twisted wire cores and a diameter of 0.6 to 1.5 mm. Never use cords thicker than 1.5 mm or single-wire cords, as they may damage the speaker terminals.

Be sure to interconnect the polarities of the terminals on the speakers and main unit (≈ to ≈, √ to √). When making connections, be careful that none of the core wires of the speaker cords stick out and touch neighboring terminals, other speaker cords or the rear panel. Speakers with an impedance of 6 to 16 Ω /ohms can be connected for use as center and surround speakers.

Protector circuit. This unit is equipped with a high-speed protection circuit. The purpose of this circuit is to protect the speakers under circumstances such as when the output of the power amplifier is inadvertently shortcircuited and a large current flows, when the temperature surrounding the unit becomes unusually high, or when the unit is used at high output over a long period which results in an extreme temperature rise. When the protection circuit is activated, the speaker output is cut off and the power supply indicator LED flashes. Should this occur, please follow these steps: be sure to switch off the power of this unit, check whether there are any faults with the wiring of the speaker cables or input cables, and wait for the unit to cool down if it is very hot. Improve the ventilation condition around the unit and switch the power back on.

If the protection circuit is activated again even though there are no problems with the wiring or the ventilation around the unit, switch off the power and contact a DENON service center.Note on speaker impedance. The protector circuit may be activated if the set is played for long periods of time at high volumes whenspeakers with an impedance lower than the specified impedance (for example speakers with an impedance of lower than 4 Ω /ohms) are connected. If the protector circuit is activated, the speaker outputis cut off. Turn off the set’s power, wait for the set to cool down, improve the ventilation around the set, then turn the power back on. Power oparation switch (ON/STANDBY).(17)Headphones jack (PHONES).(20)Remote control signal sensor(REMOTE SENSOR).(10)OPEN/CLOSE button (5 OPEN/CLOSE).(17)Play button (1).(17)Pause button (3).(18)Stop/Tuner band button (2/BAND).(18, 28)Skip/Tuner tuning – button(8/TUNING –).(18, 28)Skip/Tuner tuning + button(9/TUNING +).(18, 28). !0AUTO DECODE/2CH MODE button.(22)!15CH STEREO button.(26)!2SURROUND MODE button.(19)!3STATUS button.(19)!4TIMER/SET button.(38, 39)!5SDB/TONE button.(20)!6MASTER VOLUME control.(19)!7Input function switching/select dial(FUNCTION/SELECT).(19, 20, 38, 39)!8Display!9Disc tray.(17).

ENGLISHRemote control unit. For details on the functions of these parts, refer to the pages given in parentheses ( ). Some of the buttons on the remote control unit have two functions.The functions are switched using the remote control mode selector buttons (CDR/MD/TAPE, TUNER/TV/VCR and DVD). After one of these buttons is pressed, the function will not switch until another remote control mode selector button is pressed. The remote control unit’s mode switches as described below when the buttons are pressed.CLEAR button(34)CALL button.(34)DISPLAY button.(31)RETURN button.(18)MENU button.(38)Cursor buttons.(12).System buttons.(11)SUBTITLE button (DVD).(36)RDS button (TUNER).(11, 30)AUDIO selector button (DVD).(36).PTY button (TUNER)(11, 30)Program/direct button(PROG/DIRECT).(34)A-B repeat button(REPEAT A-B).(33)Channel select button(CH. SELECT).(22)Test tone button (T.TONE).(22)SETUP button.(12).

Notes on Batteries. Use R6P/AA batteries in the remote control unit. The batteries should be replaced with new ones approximately once a year, though this depends on the frequency of usage. Even if less than a year has passed, replace the batteries with new ones if the set does not operate even when the remote control unit is operated nearby the set. (The included battery is only for verifying operation.

1While pressing the CDR/MD/TAPE remote control modeselector button, input the 3-digit number (“000”, “111”and “222”) corresponding to the device you want topreset (CDR, MD or TAPE), referring to the table below. Release the CDR/MD/TAPE button after inputtingthree digits.

This completes the presetting operation.Table 1: Combinations of Personal System CodesCDR/MD/TAPE Input the 3-digit number while pressingCDR/MD/TAPE.CDR000MD111TAPE222This is set to CDR by factory default.NOTE:. Only one device (CDR, MD or TAPE) can be stored in the preset memory. 1 Press the CALL button while pressing the TUNER/TV/VCR remote control mode selector button, then input the three-digit number corresponding to the code of the manufacturer of the TV whose signals you want to store, referring to the included list of remote control unit codes. Release the TUNER/TV/VCR button after inputting three digits.

This completes the presetting operation.Example: To preset to “Hitachi 074”TUNER/TV/VCRPress the buttons below while pressingTUNER/TV/VCR.HITACHITV POWER074“074”CALLThis is set to “Hitachi 074” by factory default.NOTE:. Preset codes set upon shipment from the factory and when reset. For tape deck (TAPE)MODEVOLUMEBANDMUTECHSHIFTNTSC/PALSTATUSTUMEMOSUB TITLE AUDIOANGLETOP MENU6: Rewind7: Fast-forward2: Stop1: Forward Play:: Reverse PlayBefore operating the remote controlTUNER/TV/VCRunit!Be sure to press the proper remote control mode selector button to set the remote control unit to the AV mode.c.

For TUNERMODEVOLUMEBANDMUTECHSHIFTNTSC/PALSTATUSTUMEMOSUB TITLEAUDIOANGLETOP MENURDSPTYCTRTPROG/DIRECTREPEAT A-BREPEATRANDOMSHIFT: Switch preset channel rangeCHANNEL: Preset channel up/down(+, –)TUNING (+, –): Tuning up/downBAND: Switch between AM and FM bandsMODE: Switch between AUTO and MONOMEMORY: Preset memoryRDS: Use this button to automatically tune tostations using the radio data system.1 RDS1 PTY1 TPOFF 0PTY: Pressthis button after selecting“PTY” with theRDS button to select one of the 29 program types.CT: Use this to correct the time of the clock on theADV-1000. Press this button when the timeservice of an RDs station is being properlyreceived.

“TIME” is displayed for 2 seconds andthe ADV-1000’s clock is corrected. “NO TIMEDATA” is displayed if the RDS station does notoffer a time service and when the broadcast is notbeing received properly.RT: Press this button when receiving RDS stations toselect the frequency, PS, PTY or RT display.Note that this button will not function if thereception is poor.The display mode changes as follows each timethe button is pressed.1 PS1 RT1 PTYFrequency 0. (2) Before setting up the system.

This section describes surround-related setup operations. For DVD-related setup operations, see page 41. The setup operations cannot be performed while discs are playing.

Set the stop mode first.1Refer to “CONNECTIONS” (pages 5 to 8) and checkthat all connections are correct.22Turn on the power.Press the POWER switch (button).ON / STANDBYLight(green)ONPOWER2CHON123POWERCHVCROFF456Main unitRemote control unitVCR POWERCHVOLCLEAR789TVWhen pressed, the power turns on and the display lights. TheTV POWERCHTV/VCRSLEEPCALL+100soundis muted for several seconds, after which the unitDISPLAYRETURN INPUT MODE SURROUNDoperates normally. When pressed again, the power turns off,MENUFUNCTIONthe standby mode is set and the display turns off.4Whenever the ON/STANDBY button is in the STANDBY state,ENTERthe apparatus is still connected on AC line voltage. 1At the setup screen, select “QUICK SETUP”, then pressthe ENTER button. (See page 13.)2Use theandcursorbuttons to select “Room Space”,then use theandcursorbuttons to set the size of the room. The setsizeis displayedinyellow.Remote control unitQ U I C K S E T U P M E N U BE X I TR O O M S P A C E: ( 4. 2 m )S M A L LM E D.

L A R G ES E A T I N G P O S I T I O NC E N T E RB A C KFRONTSMALL2.7mCENTERSMALL2.4mSURROUNDSMALL2.1mSUBWOOFERYES2.7mSEL ECT:DEC I S I ON: ENTER BUTTON3Use theandcursorbuttons to select “SeatingPosition”, then use theandcursorbuttons toset the size of the position.Remote control unit. The set position is displayed in yellow.Q U I C K S E T U P M E N UBE X I TR O O M S P A C E: ( 4. 2 m )S M A L LM E D. L A R G ES E A T I N G P O S I T I O NC E N T E RB A C KFRONTSMALL2.4mCENTERSMALL1.8mSURROUNDSMALL2.4mSUBWOOFERYES2.4mSEL ECT:DEC I S I ON: ENTER BUTTON. 4Enter the setting.ENTER. The SYSTEM SETUP MENUreappears.Remote control unitNOTE:. Select “Large” or “Small” not according to the actual size of the speaker but according to the speaker’s capacity for playing low frequency (approximately 100 Hz and below) signals.

Download the 2Pac Discography 2007 Torrent or choose other Verified Torrent Downloads for Free with TorrentFunk. Tupac discography download. (Remember Me). 1999 - Still I Rise. 2000 - The Rose that Grew from Concrete. 2002 - Better Dayz. 2002 - Maximum. 2003 - Tupac Resurrection OST. 2004 - Loyal to the Game. 2005 - The passion of Tupac. 2006 - Pac's Life. 2007 - Beginnings: The Lost Tapes 1988-1991 Collection albums. 1998 - Greatest Hits. 2001 - Until the End of Time. Download 2pac-Discography Torrent at TorrentFunk. We have 34 2pac-Discography Other torrents for you! Download 2PAC (Tupac Shakur) - DISCOGRAPHY (1991-07) CHANNEL NEO torrent or any other torrent from Audio Music Direct download via magnet link.

If you do not know, try comparing the sound at both settings (setting the volume to a level low enough so as not to damage the speakers) to determine the proper setting.ParametersLarge Select this when using speakers that can fully reproduce low sounds of below 100 Hz.Small Select this when using speakers that do not provide sufficient volume for playing low frequencies of 100 Hz and less. When this setting is made, frequencies below the frequency set at the subwoofer frequency setting are assigned to the subwoofer.None Select this when no speakers are installed.

Select “Yes” when a subwoofer is installed,“No” when a subwoofer is not installed.If the subwoofer has sufficient low frequency playback capacity, good sound can be achieved even when “Small” is set for the front, center and surround speakers.For the majority of speaker system configurations, using the SMALL setting for all five main speakers and Subwoofer On with a connected subwoofer will yield the best results. Subwoofer frequency (SW FREQ.). For the subwoofer frequency at the speaker setting screen, set the bass crossover frequency for playback from the subwoofer. Select “80 Hz”, “120 Hz”, “150 Hz” or “180 Hz” (-6 dB for each). Bass sound below these frequencies is played from the subwoofer.(This is set to “120 Hz” by factory default.)Assignment of low frequencies.

In the Dolby Digital, Dolby Pro Logic II, DTS, and virtual surround modes, the low frequency signals for channels whose speaker settings are set to “Small” are assigned to the subwoofer.