Variables specific to CPack RPM generatorCPackRPM may be used to create RPM packages using.CPackRPM is a generator thus it uses the CPACKXXXvariables used by.CPackRPM has specific features which are controlled by the specificsCPACKRPMXXX variables.CPACKRPMXXXX variables may be used in order to havecomponent specific values. Note however that refers to thegrouping name written in upper case. It may be either a component name ora component GROUP name. Usually those variables correspond to RPM spec fileentities.

One may find information about spec files here. Note part of variables is preferred to be in upper case (for e.g. Ifcomponent is named foo then use CPACKRPMFOOXXXX variable name format)as is with other CPACKXXXX variables.For the purposes of back compatibility (CMake/CPack version 3.5 and lower)support for same cased component (e.g. FOo would be used asCPACKRPMfOoXXXX) is still supported for variables defined in olderversions of CMake/CPack but is not guaranteed for variables thatwill be added in the future. For the sake of back compatibility same casedcomponent variables also override upper cased versions where both arepresent.Here are some CPackRPM wiki resources that are here for historic reasons andare no longer maintained but may still prove useful.List of CPackRPM specific variables: CPACKRPMCOMPONENTINSTALLEnable component packaging for CPackRPM.

Mandatory: NO. Default: OFFIf enabled (ON) multiple packages are generated. By default a single packagecontaining files of all components is generated. CPACKRPMPACKAGESUMMARY CPACKRPMPACKAGESUMMARYThe RPM package summary. Mandatory: YES. Default:CPACKRPMPACKAGENAME CPACKRPMPACKAGENAMEThe RPM package name.

Mandatory: YES. Default:CPACKRPMFILENAME CPACKRPMFILENAMEPackage file name.Mandatory: YES. Default: -.rpm with spacesreplaced by ‘-‘This may be set to RPM-DEFAULT to allow rpmbuild tool to generate packagefile name by itself.Alternatively provided package file name must end with.rpm suffix. NoteBy using user provided spec file, rpm macro extensions such as forgenerating debuginfo packages or by simply using multiple components morethan one rpm file may be generated, either from a single spec file or frommultiple spec files (each component execution produces it’s own spec file).In such cases duplicate file names may occur as a result of this variablesetting or spec file content structure. Duplicate files get overwrittenand it is up to the packager to set the variables in a manner that willprevent such errors.

The%ifxxx conditionals are used to begin a section of the spec file that is specific to a particular architecture or operating system. They are followed by one or more architecture or operating system specifiers, each separated by commas or whitespace. Rpmbuild for a single tar file to extract to a dir. This is stupid but I have no choice, what I have is single folder with 6 subdirs full of files. What I need to do create a tar file and slap this tar file into an RPM so when the RPM runs it takes the tar and untars it to a folder of my choice (which I'll set in the spec file).

CPACKRPMPACKAGEVERSIONThe RPM package version. Mandatory: YES.

Default:CPACKRPMPACKAGEARCHITECTURE CPACKRPMPACKAGEARCHITECTUREThe RPM package architecture. Mandatory: YES. Default: Native architecture output by uname -mThis may be set to noarch if you know you are building a noarch package. CPACKRPMPACKAGERELEASEThe RPM package release. Mandatory: YES. Default: 1This is the numbering of the RPM package itself, i.e.

The version of thepackaging and not the version of the content (see). One may change the default value ifthe previous packaging was buggy and/or you want to put here a fancy Linuxdistro specific numbering. Sonalksis stereo tools vst and company. Set ( CPACKRPMPACKAGEREQUIRESPREUN 'shadow-utils, initscripts' ) CPACKRPMPACKAGESUGGESTS CPACKRPMPACKAGESUGGESTSRPM spec suggest field.

Mandatory: NO. Default: -May be used to set weak RPM dependencies (suggests).

Note that you mustenclose the complete requires string between quotes. CPACKRPMPACKAGEPROVIDES CPACKRPMPACKAGEPROVIDESRPM spec provides field. Mandatory: NO.

Default: -May be used to set RPM dependencies (provides). The provided package listof an RPM file could be printed with. Rpm - prefix or - relocatein order to install it at an alternate place see rpm(8).

Note thatcurrently this may fail if is set to ON. Ifis set then you will get a warning message butif there is file installed with absolute path you’ll get unexpected behavior. CPACKRPMSPECINSTALLPOSTDeprecated - use instead. Mandatory: NO. Default: -. Deprecated: YESThis way of specifying post-install script is deprecated, use.May be used to set an RPM post-install command inside the spec file.For example setting it to /bin/true may be used to preventrpmbuild to strip binaries. CPACKRPMSPECMOREDEFINERPM extended spec definitions lines.

Mandatory: NO. Default: -May be used to add any%define lines to the generated spec file. CPACKRPMPACKAGEDEBUGToggle CPackRPM debug output.

Mandatory: NO. Default: -May be set when invoking cpack in order to trace debug informationduring CPack RPM run. For example you may launch CPack like this. Cpack - D CPACKRPMPACKAGEDEBUG = 1 - G RPM CPACKRPMUSERBINARYSPECFILE CPACKRPMUSERBINARYSPECFILEA user provided spec file. Mandatory: NO.

Default: -May be set by the user in order to specify a USER binary spec fileto be used by CPackRPM instead of generating the file.The specified file will be processed by configurefile( @ONLY). CPACKRPMGENERATEUSERBINARYSPECFILETEMPLATESpec file template. Mandatory: NO. Default: -If set CPack will generate a template for USER specified binaryspec file and stop with an error. For example launch CPack like this. Cpack - D CPACKRPMGENERATEUSERBINARYSPECFILETEMPLATE = 1 - G RPMThe user may then use this file in order to hand-craft is ownbinary spec file which may be used with. CPACKRPMPREINSTALLSCRIPTFILE CPACKRPMPREUNINSTALLSCRIPTFILEPath to file containing pre (un)install script.

Mandatory: NO. Default: -May be used to embed a pre (un)installation script in the spec file.The referred script file (or both) will be read and directlyput after the%pre or%preun sectionIf is set to ON the (un)installscript for each component can be overridden withCPACKRPMPREINSTALLSCRIPTFILE andCPACKRPMPREUNINSTALLSCRIPTFILE.One may verify which scriptlet has been included with. Rpm - qp - scripts package.

Rpm CPACKRPMPOSTINSTALLSCRIPTFILE CPACKRPMPOSTUNINSTALLSCRIPTFILEPath to file containing post (un)install script. Mandatory: NO. Default: -May be used to embed a post (un)installation script in the spec file.The referred script file (or both) will be read and directlyput after the%post or%postun section.If is set to ON the (un)installscript for each component can be overridden withCPACKRPMPOSTINSTALLSCRIPTFILE andCPACKRPMPOSTUNINSTALLSCRIPTFILE.One may verify which scriptlet has been included with.

Rpm - qp - scripts package. Rpm CPACKRPMUSERFILELIST CPACKRPMUSERFILELIST. Mandatory: NO. Default: -May be used to explicitly specify% file linein the spec file. Like%config(noreplace) or any other directivethat be found in the%files section. Since CPackRPM is generatingthe list of files (and directories) the user specified files ofthe CPACKRPMUSERFILELIST list will be removed fromthe generated list. CPACKRPMCHANGELOGFILERPM changelog file.

Old computer: Sync a vault to a USB flash drive. Insert the USB flash drive into a USB port on your Mac. Open and unlock 1Password, then choose Preferences Sync. Select the vault you want to migrate, then choose Folder from the drop-down menu on the right. In the file browser, navigate to the USB. You can drag 1Password.app from the Applications folder to the Trash (do not use any app cleaning tools). Then download the AgileBits Store version from our download site. Open the downloaded.pkg file to start the installation. When you're done, open the new 1Password 6.app file in Applications and go through the setup procedure. How to transfer 1password to a new computer. Import in 1Password for Mac. Open and unlock 1Password. From the File menu, choose Import. Click Other on the import screen. Click “Import a CSV File” and follow the onscreen instructions to import your data. After you’ve imported your information into 1Password, delete the unencrypted CSV file, and turn on any backup software you turned off earlier. 1) Open the Safari browser on your Mac. 2) Click the Safari menu, then choose Preferences. 3) Click the Passwords tab. 4) Now authenticate with Touch ID or type in your administrator password, then double-click a saved entry to access the full details for the saved user name and password.

Mandatory: NO. Default: -May be used to embed a changelog in the spec file.The referred file will be read and directly put after the%changelogsection. CPACKRPMEXCLUDEFROMAUTOFILELISTlist of path to be excluded. Mandatory: NO.

Default: /etc /etc/init.d /usr /usr/share /usr/share/doc /usr/bin /usr/lib /usr/lib64 /usr/includeMay be used to exclude path (directories or files) from the auto-generatedlist of paths discovered by CPack RPM. The defaut value contains areasonable set of values if the variable is not defined by the user.

If thevariable is defined by the user then CPackRPM will NOT any of the defaultpath. If you want to add some path to the default list then you can usevariable.

CPACKRPMEXCLUDEFROMAUTOFILELISTADDITIONadditional list of path to be excluded. Mandatory: NO.

Default: -May be used to add more exclude path (directories or files) from the initialdefault list of excluded paths. CPACKRPMRELOCATIONPATHSPackages relocation paths list. Mandatory: NO. Default: -May be used to specify more than one relocation path per relocatable RPM.Variable contains a list of relocation paths that if relative are prefixedby the value of or by thevalue of if the component versionis not provided.Variable is not component based as its content can be used to set a differentpath prefix for e.g. Binary dir and documentation dir at the same time.Only prefixes that are required by a certain component are added to thatcomponent - component must contain at least one file/directory/symbolic linkwith prefix for a certain relocationpath to be added. Package will not contain any relocation paths if there areno files/directories/symbolic links on any of the provided prefix locations.Packages that either do not contain any relocation paths or containfiles/directories/symbolic links that are outside relocation paths printout an AUTHORWARNING that RPM will be partially relocatable. CPACKRPMPACKAGEPREFIXPer component relocation path install prefix.

Mandatory: NO. Default: CPACKPACKAGINGINSTALLPREFIXMay be used to set per componentfor relocatable RPM packages. CPACKRPMNOINSTALLPREFIXRELOCATION CPACKRPMNOINSTALLPREFIXRELOCATIONRemoval of default install prefix from relocation paths list.

Mandatory: NO. Default: CPACKPACKAGINGINSTALLPREFIX or CPACKRPMPACKAGEPREFIX are treated as one of relocation pathsMay be used to remove CPACKPACKAGINGINSTALLPREFIX and CPACKRPMPACKAGEPREFIXfrom relocatable RPM prefix paths. CPACKRPMADDITIONALMANDIRS. Mandatory: NO.

Default: -May be used to set additional man dirs that could potentially be compressedby brp-compress RPM macro. Variable content must be a list of regularexpressions that point to directories containing man files or to man filesdirectly. NoteCurrently multiple debuginfo packages are generated if component basedpackaging is used - one debuginfo package per component. This duplicatessources if multiple binaries are using them. This is a side effect ofhow CPackRPM currently generates component packages and will be addressedin later versions of the generator.Debuginfo RPM packaging has it’s own set of variables: CPACKRPMDEBUGINFOPACKAGE CPACKRPMDEBUGINFOPACKAGEEnable generation of debuginfo RPM package(s). Mandatory: NO. Default: OFF.

NoteEach source path prefix is additionaly suffixed by src whereindex is index of the path used fromvariable. This produces /srcreplacement path.Limitation is that replaced path part must be shorter or of equallength than the length of its replacement. If that is not the case eithervariable has to be set toa shorter path or source directories must be placed on a longer path.

CPACKRPMDEBUGINFOEXCLUDEDIRSDirectories containing sources that should be excluded from debuginfo packages. Mandatory: NO. Default: “/usr /usr/src /usr/src/debug”Listed paths are owned by other RPM packages and should therefore not bedeleted on debuginfo package uninstallation. CPACKRPMDEBUGINFOEXCLUDEDIRSADDITIONPaths that should be appended tofor exclusion.

Mandatory: NO. Default. NoteSRPM package internally uses CPack/RPM generator to generate binary packagesso CMakeScripts.txt can decide during the SRPM to binary rpm generation stepwhat content the package(s) should have as well as how they should be packaged(monolithic or components). CMake can decide this for e.g. By reading environmentvariables set by the package manager before starting the process of generatingbinary rpm packages.

This way a single SRPM package can be used to producedifferent binary rpm packages on different platforms depending on the platform’spackaging rules.Source RPM packaging has it’s own set of variables: CPACKRPMPACKAGESOURCESShould the content be packaged as a source rpm (default is binary rpm). Mandatory: NO. Default: OFF.